An intercontinental network of bulk fiber optic cables transmits approximately 90% of the world?s data. Microsoft and Facebook recently joined forces to lay a 6,600 km (or 4,101 miles) Transatlantic cable from Virginia Beach to Bilbao, Spain, which will be capable of transmitting 160 terabits per second of bandwidth. That?s 16 million times more than the average home connection. The Cat5e cable bulk is currently the best choice for IT professionals.
Data can be transmitted through fiber optic cabling faster than traditional cabling due to increased capacity. Commercial uses of fiber optic cabling can transmit 10-80 Gigabits per second over just one channel. The Cat5e, Cat6 and Cat6a are popular ethernet cables. These cables are used to connect your computer to a router on a basic level. Cat5e Ethernet cables can provide up to 1Gb/second speeds at 100MHz frequencies. The “e” stands for enhanced. You know you’re getting more quality than a Cat5 but still don’t have to spend the extra money on a 6. The Cat5e cable was designed for 1000 Mbps ?gigabit? speeds. These enhanced cables should also diminish the interference between wires inside the cables otherwise known as “crosstalk.”
Even though 10 Mbps Ethernet cable is ideal for households that include two to three computers, people still tend to buy fast network cables like 100 Mbps or more in order to have faster Internet connection. It is good to know that manufacturers of cat5e cable bulk offer a lifetime warranty as well as pre and post sale tech support at their multiple distribution centers. The centers are women and minority owned and run, which benefits government contractors. Cat5e cable bulk is the best way to purchase these cables.
For all concerned, make sure to protect your network. Whole house surge protectors are designed to divert excess voltage from your home. Most insurance claims for this damage exceed $10,000. However, the $250 price tag for a main service panel surge protector will easily pay for itself. When you are shopping for surge protectors, be sure they have a UL rating of 1449, lower clamping voltage (close to 120 volts is safer, but UL standards are 330 volts), and that it absorbs at least 600 joules of energy. A surge typically measures less than 500V and lasts less than two seconds. A spike, on the other hand, is much shorter in duration ? less than one-thousandth of a second ? but can measure into the thousands of volts.
Trackback from your site.